Volleyball Boundary Adjustable 2-inch Webbing
Volleyball Boundary Adjustable 2-inch Webbing
- Adjustable Lengths for Exact Size
- Large Nickel Plated Steel Rings
- Stitched Corners
- Heavy Weight Flat Webbing
- Anchors with Bungee Cord Attached
- Sand or Grass Setup
- Storage Holders Included
Two-inch wide heavy weight UV treated polypropylene webbing boundary system. We offer two court sizes 30 x 60-ft or 26.3 x 52.6-ft (8-Meter). The four section boundary has 2.5-inch nickel plated steel rings, box stitched on each corner. Two hand winders for tangle free boundary storage. The lengths join together in middle of each web length with a plastic side-release buckle at centers. This will allow you to fine-tune court dimensions. Need a carrying bag for your boundary set? See our choices in equipment carrying bags.
Four ground anchor variations to choose from. Four 5-inch long steel grass pegs (#7SB). Four 10-inch long ABS plastic sand pegs (#BTS). Four sand anchor plates, 4-inch square x 1/4-inch thick plastic plate (#26B which you bury down into the dry sand for a better hold than pegs). All three anchor types include approximate length of 2-ft by quarter inch thick bungee cord with small zinc plated s-hook. The suspended webbing enables the boundary to form a perfect rectangle. Will then stretch when tripped on for added safety.
If you select our 8-meter court size you can purchase the optional extension set #M8EXT to enlarge the court to standard court size. A much faster and easier way to switch your court size, no loose webbing or tape measure required.
1-year limited warranty against manufacture and material defects. Black and blue web will last longer than red and yellow, which starts to show material color deterioration after 90-days of direct hot sun. Stitched splices may be present, but we guarantee no breakage of material.
Made in USA